4'' 0.8~1.5 kg/hr wiped film molecular distillation
Configuration:
1.4” glass evaporator with output jacketed, two 3L receiving flask
2.Thin film Titanium steel PTFE scraper
3.5L jacketed feeding system with automatically control gear feeding pump
4.Dry ice+ coil in one condenser with 3L receiving flask
5.Electrical control cabinet, stirring and feeding speed, vacuum gauge, thermometer, power switch, etc.
6.Heater and chiller (Support RS485)
Material preheating & heat preservation heater: RT~150C, 1000w, 8L/min
Main heater: RT~250C, 5500w, 11L/min
Internal coil chiller: -20~100C, 1000w, 11L/min
Low temp. chiller: -40~RT, 2000w, 11L/min
7.Vacuum system
Vane rotary pump: 10cfm, 0.3micron
Diffusion pump
Specification
|
Model |
WTMD-04Pro |
|
Evaporator material |
Borosilicate 3.3 glass |
|
System vacuum |
no-load <1pa |
|
Effective evaporation area |
0.15 m2 |
|
Barrel diameter |
100mm/ 4'' |
|
Feeding funnel volume |
5L |
|
Feeding rate |
0~11.5 kg/hr |
|
Throughput |
About 0.8~1.5 kg/hr |
|
Motor power |
120 Watts |
|
Maximum speed |
0~500 rpm |
|
Stirrer Seal |
PTFE |
|
Distillate receiving flask |
3L |
|
Residue receiving flask |
3L |
|
Operation temperature |
Up to 250℃ |
|
Voltage |
220V/50-60Hz, single phase |
|
Frame Material |
304 Stainless steel |
|
Floor area |
1.18 m2 |
|
Frame dimension L x W x H: |
210 x 55 x 210cm / 82 x 21.6 x 82 in. |
|
Packing size L x W x H: |
220 x 65 x 220cm / 86 x 25.8 x 86 in. |
|
G.W. |
420Kg/ 900lbs |
For the products not available in the warehouse, we offer Pre-order serivice.
It take about 3 weeks or at most 3 months for you to get the product, depends on production time.
After you placed a preoder, we will contact you in 24h with an estimated delivery date.
The order will officially start prepared after your confirmation.
Here is a $100 COUPON for all preorders(Over $1000) , welcome to use it!
ESPREORDER