WTMD-06Master SUS304 Wiped Film Distillation
Wiped Film Evaporator
WTMD-06Master SUS304 wiped film distillation adopt the difference in the mean free path of molecules to separate and purify cannabis oil. It carries out the thermal separation technology process under the vacuum status, and its lower evaporation temperature keeps the original characteristics of CBD Oil.
WTMD-06Master use the internal Titanium steel PTFE film scraper to scrape the material into a liquid film of uniform thickness. It greatly shortens the time for the material to be distilled, and conducts continuous and rapid distillation.
WTMD-06Master has the high evaporation efficiency, simple structure and good separation effect.
Configuration:
12inch PLC touch screen, all settings of system are integrated to control by the screen,data memory , one bottom to start work.
6" SUS304 evaporator with output jacketed, two large 5L receiving flask
Thin film Titanium steel PTFE scraper
.5Ljacketed feeding system with automatically control gear feeding pump Dry ice+ coil in one condenser with 2L receiving flask
Electrical control cabinet, stirring and feeding speed, vacuum gauge, thermometer,power switch, etc.
Heater and chiller (Support RS485)
Material preheating & heat preservation heater: RT~150C,1000w,8L/min Main heater: RT~250C，5500w, 11L/min
lnternal coil chiller: -20~100C,1000w,11L/min
Low temp. chiller: -40~RT,2000w,11L/min
Vacuum system l Vane rotary pump: 21cfm, 0.3micron|Diffusion pump
Specification:
|
Model |
WTMD-06Master |
|
Evaporator material |
SUS304 |
|
System vacuum |
no-load <1pa |
|
Effective evaporation area |
0.25 m2 |
|
Barrel diameter |
150mm/ 6" |
|
Feeding funnel volume |
5L |
|
Feeding rate |
0~11.5 kg/hr |
|
Throughput |
About 2.0~3.0 kg/hr |
|
Motor power |
120 Watts |
|
Maximum speed |
0~500 rpm |
|
Stirrer Seal |
PTFE |
|
Operation temperature |
Up to 250℃ |
|
Voltage |
220V/50-60Hz,single phase |
|
Frame Material |
304 Stainless steel |
|
Floor area |
1.5 m2 |
|
G.W. |
600Kg /1300lbs |
For the products not available in the warehouse, we offer Pre-order serivice.
It take about 3 weeks or at most 3 months for you to get the product, depends on production time.
After you placed a preoder, we will contact you in 24h with an estimated delivery date.
The order will officially start prepared after your confirmation.
Here is a $100 COUPON for all preorders(Over $1000) , welcome to use it!
ESPREORDER